Better for the planet
When you use Apollo+ LocAl® aluminium you are making a more sustainable choice, lowering the carbon emissions of the aluminium used in your project, and most importantly, doing better for the planet. Read more...
Apollo+ is a modular feature batten system suitable for wall and ceiling applications. At the system's core is a proprietary clip connection that is pre-set at your specified centres before arriving on-site. This clip creates a concealed connection that achieves a clean, modern aesthetic while allowing quick and easy installation on-site.
Completely customisable
The Apollo Batten system's modular nature is highly customisable, allowing it to adapt to your project-specific requirements. This gives you creative freedom to design a stunning linear feature that is unique to your project.
The batten range comprises eight profile shapes. Designs can mix and match these profiles. Your Apollo Aluminium Batten feature could consist of one profile repeated throughout or a mix and match of the various shapes to add depth and texture to your linear design.
Lower-Carbon Aluminium. IT's better.
We call our aluminium battens Apollo+ because it's exactly that. A greener solution for your project. No smoke and mirrors, just facts. Read more...
Batten Profiles
Apollo Aluminium battens are available in nine different profiles as standard; profile dimensions listed are depth by width.
Are other sizes available?
Yes! A range of custom profiles are possible, subject to minimum order quantities and additional lead time. If you have an application in mind with a profile not listed above, please reach out to one of our MBS Architectural representatives to discuss.
Batten Spacing
Batten spacing refers to the physical gap between each feature batten and is a critical factor to consider when designing your next linear batten feature.
Batten spacing impacts the density of the battens across your design and has on a strong impact on your design intent, the linear effect and the overall cost. Our Apollo Batten system is modular, allowing it to adapt to the various demands required of your design.
When selecting Batten spacing, you have full freedom to select a gap (down to the mm) that best suits your design intent. Our minimum recommended gap is 3mm.
Lengths
Apollo Aluminum Battens are supplied at 3600mm as standard. Other lengths are available upon request - can be manufactured up to a maximum length of 6000mm.
Finishes
Aluminum is an excellent materiality as it offers an extensive range of finishing options. Finishing options include solid powdercoats, anodising and applying a timber effect powdercoat to achieve a natural timber look with an Aluminum Batten.
Powder Coating
We have full access to the catalogues of leading powder coat suppliers Interpon and Dulux. Please contact your MBS consultant to discuss the full range of colour options.
Please note: Some colours incur an additional charge (eg. Dulux’s Fluroset and Interpon’s D3020 ranges). Minimum order quantities may apply to some colours.
Timber Effect Range
Apollo aluminum battens are available in 10 timber effect powder coat finishes.
African Mahogany
Alaskan Oak
Argentine Osage
Blonde Oak
Blackbutt
Charcoal Ash
European Spruce
Koa
Merbau
Nordic White Oak
Anodising
We are able to offer anodised finishes from the following three companies:
Setting new standards in architectural finish performance, DecoUltra has combined the flexibility of creative freedom with superior durability to create the architectural industry’s most premium anodising and hard anodising finishes.
⤷ Explore more
Australia’s largest independent aluminium finisher; incorporating 11 production facilities across Australia. AAF provides the highest quality anodising and powder coating finishes for architectural aluminium throughout Australia and beyond.
⤷ Explore more
One of the largest designated anodising plants in Australia. Universal Hardcoat creates a superior satin finish available in an extensive range of 24 colours. We are able to anodise aluminium sections up to 10 metres for clear and 6.5 metres for colour.
⤷ Explore more
Framing System
Apollo Battens are designed to be installed in both horizontal (ceiling) and vertical (wall applications).
Apollo Top Cross Rail (TCR) Ceiling Track
Dims: 25mm deep x 31mm wide, with a 7mm channel to integrate acoustic backing (if required).
Our ceiling track is designed to replace a Top Cross Rail (TCR) in a standard suspended ceiling installation. We supply clips to suspend the TCR and 05mm threaded rod (for a drop up to 1200mm) as part of the Apollo System. Note: Fixing to connect the threaded rod droppers to the substrate are not included.
Apollo Wall Track
Dims: 17mm deep x 40mm wide, with a 7mm channel to integrate acoustic backing (if required).
Fixings: Recommended screw fixing centers @ 300mm centers.
Apollo Wall Track (for a curving wall)
Dims: 17mm deep x 40mm wide, with a 7mm channel to integrate acoustic backing (if required).
Wall track that is supplied to site with notching that allows flexibility. The track will then adapt to suit the curvature of your pre-prepared substrate.
Min/max radius: TBC
Fixings: Recommended screw fixing centers @ 300mm centers. May be required more frequently at righter radii.
Note: Screws to suit substrate are not supplied as part of the Apollo System.
System Components
Top Cross Rail
The Apollo Top Cross Rail is supplied with batten clips pre-indexed at the specified centers for the project, meaning the majority of installation set-out work has been completed prior to the material arriving on-site. Once the Aluminum Battens are clipped into the TCR, the batten clips become fully concealed.
Aluminum Batten Joiners
Internal keyways within each Apollo Aluminum Batten allow for friction fit joiners to be inserted, allowing for consistent alignment of each profile. This joiner is also available in a folded 90 degree option for simple alignment of mitred battens.
Top Cross Rail Joiners
(Ceiling Track)
To keep the number of system components to a minimum, the friction fit joiners that are used to align the Aluminum battens can also be used to connect the Top Cross Rails (TCR) to one another. The joiners are insert in the top slot of the TCR.
End Caps
Where Apollo Aluminum Batten ends are visible, it may be advisable to add end caps for a seamless look. These are supplied at an additional charge and are powder coated closest to match the finish of the battens. Installation is easy, with a simple push-fit connection.
End Junctions
Angle End-Stop:
Base Angle
Anti-slip:
Services Integration
Services which integrate into the Apollo aluminium batten system must not exceed 3kg/m3, and any weights over 3kg/m3 must be self-supporting.
Get in touch to discuss your options. For further detailing and integration of services, we recommend you visit our Resources Hub where we have a number of drawings and examples of different detailing scenarios. If you can't find something you're looking for in the Hub, reach out to our team who will be more than happy to provide recommendations.
Installation
Typical Installation Set Up
Ceiling Application:
Wall Application:
Fixing Spans
Our recommendation is that both Wall Track and Ceiling Top Cross Rails are installed at no greater than 600mm centers (see earlier diagrams in typical set-ups). This is intended as a guide only.
We recommend all projects are reviewed by either an independent or on-site engineer to confirm that spans are suitable for your site-specific conditions. We are happy to provide square meter weights for our system as required.Please contact your MBS representative if required.
Maximum Cantilever
The maximum cantilever recommended for the Apollo Aluminum battens of any profile size is 300mm. Cantilever refers to the distance between the lastApollo track and the end of your Apollo batten.
Access Panels
The use of a drop-in hatch is the simplest solution to providing access within an Apollo Batten Ceiling. Hatches are easy built on-site by the contractor with a typical size of 600mm x 600mm. The batten clip at each end of the Access Hatch Top Cross Rail (TCR) is to be removed.
The removal of this clip allows the TCR to sit on top of the perpendicular batten in the ceiling, without clipping in and locking in place. This ensures continuous access to the ceiling plenum above.
Access Hatch
Acoustics
Where acoustic performance is required, we supply a semi-rigid 7mm black acoustic panel. Acoustic backing is polyester and rated to meet group 1 fire compliance. When installing an Apollo Batten system with 7mm Acoustic Backing against a hard surface, an NRC of 0.25 is achieved. This can increase to an NRC of 0.50 with the addition of a 25mm air cavity behind.
Apollo tracks all come with 7mm channels that allow the Acoustic Backing to slide in between the tracks easily. Acoustic Backing is pre-cut to suit recommended track centers. This ensures easy and accurate installation. The material is flexible and further alterations can be made on-site to cut to specific sizes. If further acoustic performance is required, acoustic batts can be easily added behind the batten to increase performance (up to NRC 1.0). Please consult your MBS representative for further guidance when looking to improve the acoustic performance of your design.
Acoustic Testing | Autex Reports (Apollo)
Acoustic Insulation Datasheet | Autex Acoustic Insulation Blanket Datasheet (Apollo)
Acoustic Backing Datasheet | Autex 7mm APA Acoustic Backing Datasheet (Apollo)
Maintenance
Caring for your Apollo Aluminium Batten product correctly should greatly enhance its longevity. Below are our recommendations for extending the life of your Aluminium system. A simple regular clean will minimise the degradation of your finish from exposure to elements such as dirt and grime, which can build-up over time and be detrimental to your finish. The frequency of a cleaning regiment is dependent on a number of factors(such as environment and exposure). Our recommendation is that the Aluminium Batten system be cleaned once every twelve (12) months and a record of this cleaning is kept.
Fire Compliance
The Apollo aluminium system achieves a Group 1 rating as per Section 9(n) of AS 5637.1-2015.
The determination of the group number is based on the AS/NZS 3837-1998 test and is deemed valid in the cone calorimeter for the assignment of National Construction Code (NCC) group number.
Warranty
For interior applications, the Apollo Aluminum Batten System comes with a 10-year warranty. Please contact your MBS representative for your project specific warranty.
We make a conscious choice to use locally extruded, lower carbon aluminium, so your CO2e emissions on a project can be more than halved.
An Embodied Carbon Comparison:
Traditional supply Vs Apollo+ Aluminium
All our Apollo+ Aluminium is cleaner, not because we’re ticking a box, but because it’s the right thing to do. And we’re so committed to this, we’re offering it at the same price as standard aluminium - so our (and your) footprint is lighter.
Why Choose Apollo+?
It's called Apollo+ because it's exactly that.
A solution for your project, + a little more. No smoke and mirrors, just facts.
The carbon footprint of LocAl® Green is up to 50% less than the global average for primary aluminium production* (ex smelter based on Scope 1 and Scope 2 emissions). Whilst LocAl® Super Green boasts one of the lowest carbon emissions for primary aluminium currently available and is 75% lower than the global average for primary aluminium production.
Reducing carbon emissions from your products is important because it mitigates the effects of global climate change, improves public health, boosts the global economy, and maintains biodiversity.
When we cut carbon emissions, we help ensure cleaner air, water, and food for our generation and for generations yet to come. Choosing to use LocAl® Aluminium as part of a responsible procurement strategy for your business will positively impact your organisation’s environmental impact and our climate.
Lower your footprint, do the right thing
Every material.one source.
Let's bring your project to life.
.svg){kind=small}